SmartOne PTC Max Single Bottom Heater:
SmartOne heaters' elements are PTC positive temperature coefficient semiconductors – making the heaters self-limiting. That is, they reach a set maximum sheath temperature (which is below the ignition point of most combustible materials), meaning they are especially safe for process applications.
WATTS | VOLTS | HOTZONE MM/IN. | RISER MM/IN. | 304SS 316SS | TITANIUM | Ship Wt. Lbs./Kg |
1000 | 120 240 | 330(13) | 381(15) | S1LSP1113 S1LSP1213 | S1LTP1113 S1LTP1213 | 10(4.5) |
2000 | 240 480 | 430(17) | 483(19) | S1LSP2217 S1LSP2417 | S1LTP2217 S1LTP2417 | 11(5) |
3000 | 240 480 | 585(23) | 635(25) | S1LSP3223 S1LSP3423 | S1LTP3223 S1LTP3423 | 12(5.5) |
4000 | 240 480 | 735(29) | 635(25) | S1LSP4229 S1LSP4429 | S1LTP4229 S1LTP4429 | 13(6) |
5000 | 240 480 | 890(35) | 940(37) | S1LSP5235 S1LSP5435 | S1LTP5235 S1LTP5435 | 14(6.5) |
6000 | 240 480 | 1041(40) | 1270(50) | S1LSP6240 S1LSP6440 | S1LTP6240 S1LTP6440 | 15(7) |
1600 | 240 480 | 430(17) | 483(19) | S1LSP1.6217 S1LSP1.6417 | S1LTP1.6217 S1LTP1.6417 | 11(5) |
2400 | 240 480 | 585(23) | 635(25) | S1LSP2.4223 S1LSP2.4423 | S1LTP2.4223 S1LTP2.4423 | 12(5.5) |
3200 | 240 480 | 735(29) | 635(25) | S1LSP3.2229 S1LSP3.2429 | S1LTP3.2229 S1LTP3.2429 | 13(6) |
4000 | 240 480 | 890(35) | 940(37) | S1LSP4235 S1LSP4435 | S1LTP4235 S1LTP4435 | 14(6.5) |
4800 | 240 480 | 1041(40) | 1270(50) | S1LSP4.8241 S1LSP4.8441 | S1LTP4.8241 S1LTP4.8441 | 15(7) |
5600 | 240 480 | 1195(47) | 1270(50) | S1LSP5.6247 S1LSP5.6447 | S1LTP5.6247 S1LTP5.6447 | 18(8) |
LONG ELEMENT LIFE:
• PTC heater element lasts longer than conventional heaters.
• Will not burn out if run in air.
• Will not burn out due to scale or sludge buildup.
SAFE DESIGN:
Heater self limits its maximum operating temperature to 250 Celsius degree. This is lower than the ignition point of most plastics.
Will not melt tanks when a 1/2' (12mm) minimum distance is maintained.
Overtemperature protection devices are not required.
Safety is built-in, not added on.
Metal-grounded construction (earth ground).
Non-floating construction.
SIZES: 1,000 watts (1kW) to 6,000 watts (6kW).
VOLTAGES::
Three voltage ranges available: 110-120 volt, 200-240 volt, and 380-480 volt.
Heater is available in single or three phase power.
CORROSION RESISTANT HEADS: Vapor resistant, flame retardant polypropylene terminal enclosures each with 3-foot (.9m) flexible PVC liquid tight conduits.
OUTSTANDING PERFORMANCE:
Watt densities of 4 watts/cm2 ensure long service life.
Auto-stabilizing solid state element prevents hot spots and ensures uniform heating.
Heater derates itself in highly viscous and high temperature solutions. Consult factory for sizing assistance.
CHEMICALLY RESISTANT:
For use in most aqueous alkaline, electroplating and rinse solutions. Check our Solution Guide or with your chemical supplier for recommended sheath material. Available in:
304 stainless steel
316 stainless steel
Titanium
CERTIFICATIONS: UL and CE.
Consult factory for the following:
Longer wire and conduit lengths.
Extended cold zones.
Temperature and level controls sized to match the heater.
We recommend temperature controls andlevel controls for use with this immersion heater.